Kia Cee'd: SRSCM / Front Impact Sensor (FIS) Description and operation

The front impact sensor (FIS) is installed in the front side member. They are remote sensors that detect acceleration due to a collision at its mounting location. The primary purpose of the Front Impact Sensor (FIS) is to provide an indication of a collision. The Front Impact Sensor (FIS) sends acceleration data to the SRSCM.

SRS Control Module (SRSCM) Repair procedures

Removal 1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes befo ...

Front Impact Sensor (FIS) Components and components location

Components ...

Other information:

Kia Cee'd JD Owners Manual: Hazard warning flasher
The hazard warning flasher should be used whenever you find it necessary to stop the vehicle in a hazardous location. When you must make such an emergency stop, always pull off the road as far as possible. The hazard warning lights are turned on by pushing in the hazard switch. Both ...

Kia Cee'd JD Service Manual: Components and components location
Components   1. Slide motor 2. Front height motor 3. Rear height motor 4. Power seat cotrol switch 5. Recline motor 6. Recline control switch 7. Lumbar support motor 8. Lumbar support switch ...