Replacement |
1. |
Remove the front door trim.
(Refer to Front Door - "Front Door Trim")
|
2. |
After loosening the mounting screws, then remove the front door inside
handle (A).
|
3. |
Install in the reverse order of removal.
|
Kia Cee'd JD Service Manual: Rail Pressure Sensor (RPS) Description and operation
Description
Rail Pressure Sensor (RPS) is installed on the delivery pipe and measures the
instantaneous fuel pressure in the delivery pipe. The sensing element (Semiconductor
element) built in the sensor converts the pressure to voltage signal. By using
this signal, the ECM ...
Kia Cee'd JD Owners Manual: Checking the brake/clutch fluid
level
■ Type A
■ Type B
Check the fluid level in the reservoir periodically.
The fluid level should be
between MAX and MIN marks on the
side of the reservoir.
Before removing the reservoir cap and
adding brake/clutch fluid, clean the area
around the reservoir cap thoroughly to
preve ...