Kia Cee'd: Emergency Call System / Description and operation
Emergency Call (eCall)
When an accident occurs or the user's request is detected, it notifies the call
center of the vehicle status using the wireless network so that the center can
provide necessary emergency service.

1. Emergency Call
2. Radio Communication network
|
3. Public-Safety Answering Point
(PSAP)
4. Emergency rescue service
|
eCall Function
1. |
Automatic notification function : It detects airbag signal triggered
by accident and automatically notifies the call center of the accident.
(1) |
An accident occurs (condition : Ignition "ON")
|
(2) |
Collision signal : Sent from the airbag control unit (ACU) to
the eCall unit
|
(3) |
Make a call : An emergency call is made to the most appropriate
public-safety answering point (PSAP).
|
(4) |
Transmit MSD : After the call is connected, the Minimum Set
of Data (MSD) is transmitted using the in-band communication
(technology that transmits data through telephone voice channel).
|
(5) |
Connect to a call center agent, who in turn provides emergency
service.
The eCall system may not work properly if the vehicle
damage is grave or the airbag does not operate due to
a minor accident.
|
|
|
2. |
Manual notification function : The driver can operate the SOS button
to notify the call center of the accident manually.
(1) |
The driver decides to operate the SOS button.
|
(2) |
Make a call : An emergency call is made to the most appropriate
PSAP.
|
(3) |
Transmit MSD : After the call is connected, the MSD is transmitted
using the in-band communication (technology that transmits data
through telephone voice channel).
|
(4) |
Connect to a call center agent, who in turn provides emergency
service.
To cancel a connection attempt while making a call by
pressing the SOS button, press the button again.
|
|
|
Configuration of eCall Controller

Input buttons & Indicators
SOS button : Press this button to make a call to the call center.
SOS TEST button : Press this button for 10 seconds or more to enter the test
mode and reset the eCall system.
LED indicator lamp : The red and green LEDs turn on for 3 seconds after the
ACC is on and stay turned off in standby until the key is turned off.
The red LED turns on when there is a problem with the eCall system.
The green LED turns on when the eCall system is operating normally.
Components
1. Head unit (AVN, Audio)
2. Emergency call system button
3. Emergency call system MIC
4. Roof antenna
5. Emergency call unit
6. Su ...
Component
The eCall unit for AVN is equipped in AVN head unit.
...
Other information:
Kia Cee'd JD Owners Manual: Safety chains
You should always attach chains
between your vehicle and your trailer.
Cross the safety chains under the tongue
of the trailer so that the tongue will not
drop to the road if it becomes separated
from the hitch.
Instructions about safety chains may be
provided by the hitch manufacturer ...
Kia Cee'd JD Service Manual: Steering Angle Sensor Description and operation
Description
The Steering Angle Sensor (SAS) is installed in MDPS (Motor Driven Power Steering)
and it sends messages to HECU through CAN communication line.
The SAS is used to determine turning direction and speed of the steering wheel.
The HECU uses the signals from th ...