Kia Cee'd: Bluetooth® Wireless Technology Audio Mode / Connecting a Device

Press the key - Select [Phone] - Select [Paired Phone List]

(1) Connected Phone : Device that is currently connected

(2) Paired Phone : Device that is paired but not connected

From the paired phone list, select the device you want to connect and press the button.

Pairing through [PHONE] Setup
Press the key Select [Phone] Select [Pair Phone] The following steps are the same as those described in the section "When No Devices have been Paired" on the previous page. ✽ NOTICE ...

Changing Priority
What is Priority? It is possible to pair up to five Bluetooth® Wireless Technology devices with the car audio system. The "Change Priority" feature is used to set the connection priority of ...

Other information:

Kia Cee'd JD Service Manual: Front Wiper Motor Repair procedures
Removal 1. Remove the cap (B) and remove the nuts, then remove the wiper arm (A). Tightening torque : 22.6 ~ 26.5 N.m(2.3 ~ 2.7 kgf.m, 16.6 ~ 19.5 lb-ft) 2. If necessary ...

: Headlamps
Using the High Beam Headlamps Push the lever away from you to switch the high beams on. Push the lever forward again or pull the lever toward you to switch the high beams off. Slightly pull the lever toward you and release it to flash the headlamps. Switching Headlamp Exit Delay On and Off To ...

© 2017-2026 www.kceed.com