Kia Cee'd: Engine Control System / Accelerator Position Sensor (APS) Specifications

Kia Cee'd JD Service Manual / Fuel System / Engine Control System / Accelerator Position Sensor (APS) Specifications

Specification
 
Accelerator
Position
Output Voltage (V) [Vref=5V]
APS1
APS2
C.T
0.7 ~ 0.8
0.29 ~ 0.46
W.O.T
3.85 ~ 4.35
1.93 ~ 2.18

Accelerator Position Sensor (APS) Description and operation
Description Accelerator Position Sensor (APS) is installed on the accelerator pedal module and detects the rotation angle of the accelerator pedal. The APS is one of the most imp ...

Accelerator Position Sensor (APS) Schematic diagrams
Circuit Diagram ...

Other information:

Kia Cee'd JD Service Manual: Antenna Coil Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the steering column shroud panel. (Refer to Body - "Crash Pad Lower Panel") 3. Disconnect the connector (B) of the coil ...

: Wipers and Washers – Troubleshooting
Wipers and Washers – Warning Lamps Illuminates when the windshield washer fluid is low. Wipers and Washers – Frequently Asked Questions Why are there streaks and smears on the windshield? The wiper blades could be dirty, worn or damaged. Check the wiper blades. If the wiper blades are dirty, ...

© 2017-2026 www.kceed.com