Inspection |
1. |
Remove the cowl top cover. (Refer to the wiper)
|
2. |
Disconnect the windshield deicer connector (A) from the wiper motor
linkage.
|
3. |
Check for continuity between the terminals of deicer lines.
|
4. |
Turn the ignition switch ON and the windshield deicer switch ON, then
measure the voltage between the terminals of harness side deicer connector.
|
Kia Cee'd JD Service Manual: Troubleshooting
Troubleshooting
Ignition System
Symptom
Suspect Area
Remedy
Engine will not start or is hard to
start (Cranks OK)
Ignition lock switch
Inspect ignition lock switch, or replace as requ ...
Kia Cee'd JD Service Manual: Description and operation
Description
The starting system includes the battery, starter, solenoid switch, ignition
switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch,
connection wires and the battery cable.
When the ignition key is turned to the start position, current ...