Adjustment |
1. |
After loosening the tail gate hinge (A) mounting bolt, adjust the tail
gate by moving it up or down, or right or left.
|
2. |
Adjust the tail gate height by turning the tail gate overslam bumpers
(B).
|
3. |
After loosening the tail gate striker (C) mounting bolts, adjust the
tail gate striker by moving it up or down, or right or left.
|
Kia Cee'd JD Service Manual: Input Speed Sensor 2 Description and operation
Description
The input shaft speed sensor is important in that it detects the input shaft
RPM and sends this information to the Transmission Control Module (TCM).
It provides important input information for electric control.
The information is needed in all operations, i ...
Kia Cee'd JD Owners Manual: User Settings
In this mode there are 3 kinds of the submenu.
WARNING
Do not adjust the User Setting
while driving. You may lose your
steering control and cause severe
personal injury or accidents.
1. Stop the vehicle with the ignition
switch in the ON position or engine
running.
2. Press the ▲ ...