Inspection |
1. |
Press the VENT switch more then 4 times within 2 seconds while pressing
the OFF switch.
* For diagnostic procedure, refer to DTC guide.
|
Replacement |
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the glove box housing.
(Refer to Body - "Glove Box Housing")
|
3. |
Remove the shower duct (A).
|
4. |
Disconnect the connector and then remove the cluster ionizer (B) after
loosening the mounting screws.
|
5. |
Install in the reverse order of removal.
|
Kia Cee'd JD Service Manual: Engine Control Module (ECM) Schematic diagrams
ECM (Engine Control Module)
ECM Harness Connector
ECM Terminal Function
Connector [C200-A]
Pin No.
Description
Connected to
1
Injector (Cylinder #3) [High] control output
...
Kia Cee'd JD Service Manual: Components and components location
Components
[AFLS ECU]
...