Kia Cee'd: Heater / Temperature Control Actuator Description and operation

Kia Cee'd Service Manual / Heating,Ventilation, Air Conditioning / Heater / Temperature Control Actuator Description and operation

Description
The heater unit includes mode control actuator and temperature control actuator.
The temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. Signal from the control unit adjusts the position of the temperature door by operating temperature switch and then temperature will be regulated by the hot/cold air ratio decided by the position of tne temperature door.
Evaporator Core Repair procedures
Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the heater & blower assembly. (Refer to Heater - &q ...

Temperature Control Actuator Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the temperature control actuator connector. 3. ...

Other information:

Kia Cee'd Service Manual: Rain Sensor Repair procedures
Inspection Rain Sensing Wiper 1. In IGN2 ON state, if auto switch input (LIN communication) is ON then both wiper low relay and wiper high relay outputs are controlled by the rain sensor input signal. 2. If the wiper switc ...

Kia Cee'd Service Manual: Side Impact Sensor (SIS) Repair procedures
Removal Side Impact Sensor 1. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 2. Remove the door scuff trim. (Refer to Body - "Door scuff trim") ...

© 2017-2019 www.kceed.com