Kia Cee'd: Rear Parking Assist System / Specifications
| Specification |
|
Item |
Specification |
||
|
Ultrasonic sensor |
Voltage rating |
DC 12 V |
|
|
Detecting range |
30 cm ~ 120 cm |
||
|
Operation voltage |
DC 9 ~ 16 V |
||
|
Operation current |
MAX 300 mA |
||
|
Operation temperature |
-30°C ~ +80°C (-22°F ~ +176°F) |
||
|
Operation frequency |
48 ± 5 KHz |
||
|
Number of sensors |
Front |
4 (Left side, Left center, Right center, Right side) |
|
| ※ Rear parking assist control
unit function and buzzer is built in BCM (body control unit). |
Components and components location
Component Location
※ Parking assist control unit
function and buzzer are built in BCM (Body Control Module)
...
Other information:
Kia Cee'd JD Owners Manual: Starting the diesel engine
To start the diesel engine when the
engine is cold, it has to be pre-heated
before starting the engine and then have
to be warmed up before starting to drive.
1.Make sure the parking brake is
applied.
2.Manual Transaxle - Depress the
clutch pedal fully and shift the
transaxle into Neut ...
Kia Cee'd JD Service Manual: Rail Pressure Sensor (RPS) Repair procedures
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the RPS at idle and various engine speed.
Condition
Output Voltage (V)
...
© 2017-2026 www.kceed.com
