Kia Cee'd: Engine Mechanical System / Special service tools

Special Service Tools
 
Tool (Number and name)
Illustration
Use
Crankshaft front oil seal installer
(09455-21200)

Installation of the front oil seal
Valve stem oil seal installer
(09222-2B100)

Installation of the valve stem oil seal
Valve spring compressor and holder
A : (09222-3K000)
B : (09222-3K100)

Removal and installation of the intake or exhaust valve
Crankshaft rear oil seal installer
A : (09231-H1100)
B : (09231-2B200)

Installation of the crankshaft rear oil seal
Ring gear stoppper
(09231-2B100)

Removal and installation of crankshaft pulley bolt.
Ring gear stopper
(09231-3D100)

Removal and installation of crankshaft pulley bolt.
Oil pan remover
(09215-3C000)

Removal of oil pan
Torque angle adapter
(09221-4A000)

Installation of bolts & nuts needing an angular method
Oil filter wrench
(09263-2E000)

Removal and installation of oil filter

Troubleshooting
Troubleshooting   Symptom Suspect area Remedy Engine misfire with abnormal internal lower engine noises. Loose or ...

Engine And Transmission Assembly
...

Other information:

Kia Cee'd JD Owners Manual: Starting the engine
WARNING Always wear appropriate shoes when operating your vehicle. Unsuitable shoes (high heels, ski boots,etc.) may interfere with your ability to use the brake and accelerator pedal. Do not start the vehicle with the accelerator pedal depressed. The vehicle can move and ...

Kia Cee'd JD Service Manual: Front Fog Lamps Repair procedures
Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the lighting switch of the multifunction switch. (Refer to Multifunction Switch) 3. With the front fog lamp switch, make sure ...

© 2017-2026 www.kceed.com