Kia Cee'd: Smart Parking Assist System (SPAS) / Smart Parking Assist System Sensor Components and components location

Smart Parking Assist System Unit Repair procedures

Removal    • When prying with a flat-tip screwdriver, wrap it with protective tap ...

Smart Parking Assist System Sensor Repair procedures

Removal Front/Rear SPAS Sensor 1. Remove the front bumper. (Refer to Body - "Front Bumper Cover") 2. Pull out the ...

Other information:

Kia Cee'd JD Service Manual: Input Speed Sensor 2 Repair procedures
Inspection Refer to DTC code "P2765, P2766" Input Shaft Speed Sensor. Removal 1. Turn off the ignition switch and then disconnect the battery (-) cable. 2. Remove the under cover. 3. ...

: Exterior Lamps
Switching the Turn Signal Lamps On and Off Push the lever up or down to switch the turn signal lamps on. Set the lever to the middle position to switch the turn signal lamps off. Note: Tap the lever up or down to make the turn signal lamps flash three times. Switching the Daytime Running Lamps ...