Kia Cee'd: Seat Electrical / Seat Heater Repair procedures

Inspection
First Seat Heater
1.
Check for continuity and measure the resistance between terminals.

 
No.
Description
No.
Description
1
Heater(-)
3
NTC(+)
2
NTC(-)
4
Heater(+)

Standard value
Cushion : 1.27 Ω ± 10%
Back: 1.09 Ω ± 10%
Set : 2.36Ω ± 10%
2.
Operate the seat heater after connecting the connector, and then check the thermostat by measuring the temperature of seat surface.
Standard value (Fabric / Leather)
Cushion :
High : 40 ± 2°C (104 ± 3.6°F)
Low : 38 ± 2°C (100.4 ± 3.6°F)
Middle : 36 ± 2°C (96.8 ± 3.6°F)
Back :
High : 46 ± 2°C (114.8 ± 3.6°F)
Low : 43 ± 2°C (109.4 ± 3.6°F)
Middl : 40 ± 2°C (104 ± 3.6°F)
Seat Heater Schematic diagrams
Circuit Diagram ...

Fuses and Relays
...

Other information:

Kia Cee'd JD Service Manual: Power Seat Control Switch Repair procedures
Inspection 1. With the power seat switch in each position, make sure that continuity exists between the terminals below. If continuity is not as specified, replace the power seat switch. A : Power seat control switch B : Lumbar support swi ...

Kia Cee'd JD Owners Manual: Headlight aiming
Without AFLS 1. Inflate the tires to the specified pressure and remove any loads from the vehicle except the driver, spare tire, and tools. 2. The vehicle should be placed on a flat floor. 3. Draw vertical lines (Vertical lines passing through respective head lamp centers) and a hor ...

© 2017-2025 www.kceed.com