Kia Cee'd: Head Lamp Leveling Device / Schematic diagrams

Components and components location

Component Location   1. Head lamp leveling switch 2. Head lamp leveling actuator (Built into the head lamp assembly) ...

Head Lamp Leveling Switch Repair procedures

Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad ...

Other information:

Kia Cee'd JD Owners Manual: Checking the tire inflation pressure
1. After driving approximately 7~10 km (4~6 miles or about 10 min), stop at a safety location. 2. Connect the filling hose (2) of the compressor directly to the tire valve. 3. Plug the compressor power cord into the vehicle power outlet. 4. Adjust the tire inflation pressure to the ...

: Connecting a Trailer
Trailer Towing Connector (If Equipped) When attaching the trailer wiring connector to your vehicle, only use a proper fitting connector that works with the vehicle and trailer functions. Note: Install the waterproof protection cap back onto the trailer towing connector whenever it is not in us ...