Ford Escape: Trip Computer / Resetting the Individual Trip Values, Configuring the Trip Computer - Vehicles With: 4.2 Inch Instrument Cluster Display Screen. Trip Data

Ford Escape 2020-2021 Owners Manual / Trip Computer / Resetting the Individual Trip Values, Configuring the Trip Computer - Vehicles With: 4.2 Inch Instrument Cluster Display Screen. Trip Data

Resetting the Individual Trip Values

  1. Use the instrument cluster display controls to navigate the home screen.
  2. Select the trip screen.
  3. Press the menu button on the steering wheel.
  4. Select Reset Individual Values.
  5. Select a trip value to reset.
  6. Press and hold the OK button until the system reset confirmation appears.

Configuring the Trip Computer

  1. Use the instrument cluster display controls to navigate the home screen.
  2. Select the trip screen.
  3. Press the menu button on the steering wheel.
  4. Select Configure View.
  5. Select values to display.

Trip Data

Trip 1 and 2

Provides trip timer, trip average fuel economy and total trip distance traveled. For hybrid vehicles, the trip also shows the distance traveled on electric power only.

Note: Trip 1 and 2 are selectable screens.

This Trip

Provides trip timer, trip average fuel economy, total trip distance traveled, and distance traveled on electric power only with the engine off. If the gasoline engine has not turned on during the trip then trip average fuel economy is not shown. This Trip resets each time you start your vehicle.

Note: This trip is a selectable screen.

Accessing the Trip Computer. Resetting the Trip Computer
Accessing the Trip Computer Vehicles With: 4.2 Inch Instrument Cluster Display Screen Use the instrument cluster display controls to navigate the home screen. Select the trip screen. Press the men ...

Head Up Display (If Equipped)
What Is the Head Up Display The system displays information on a display screen in your field of vision, allowing you to keep your eyes on the road. You can select which information the system dis ...

Other information:

Kia Cee'd JD Service Manual: Components and components location
Component Location   1. Head lamp leveling switch 2. Head lamp leveling actuator (Built into the head lamp assembly) ...

Kia Cee'd JD Service Manual: Muffler Repair procedures
Removal and Installation [Front muffler] 1. Disconnect the rear oxygen sensor connector (A). 2. Remove the front muffler (A). Tightening torque: 39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ...

© 2017-2021 www.kceed.com