Ford Escape: Remote Start / Remote Start Settings

Switching Climate Control Auto Mode On and Off

  1. Press Settings on the touchscreen.
  2. Press Remote Start Setup.
  3. Press Climate Control.
  4. Select Vehicle.
  5. Switch Auto on or off.

Note: If you switch the auto mode on, the system attempts to heat or cool the interior to 72°F (22°C).

Note: When you switch the ignition on, the climate control system returns to the last used settings.

Switching Climate Control Last Settings On and Off

  1. Press Settings on the touchscreen.
  2. Press Vehicle Settings.
  3. Press Remote Start Setup.
  4. Switch Last settings on or off.

Note: If you switch the last settings on, the system remembers the last used settings.

Switching the Heated Seat Settings On and Off

  1. Press Settings on the touchscreen.
  2. Press Vehicle Settings.
  3. Press Remote Start Setup.
  4. Press Seats.
  5. Switch Auto on or off.

Note: If you switch the heated seat settings on, the heated seats turn on during cold weather.

Switching the Heated Steering Wheel Settings On and Off

  1. Press Settings on the touchscreen.
  2. Press Vehicle Settings.
  3. Press Remote Start Setup.
  4. Press Seats and Steering Wheel.
  5. Switch Auto on or off.

Note: If you switch the heated steering wheel settings on, the heated steering wheel turns on during cold weather.

Setting the Remote Start Duration

  1. Press Settings on the touchscreen.
  2. Press Vehicle Settings.
  3. Press Remote Start Setup.
  4. Press Duration.

Note: Wait a few seconds before remotely starting the vehicle after the vehicle stops running.

Extending the Remote Start Duration. Remote Start Remote Control Indicators
Extending the Remote Start Duration To extend the remote start duration during remote start, do the following: Press the button on the remote control. Within three seconds, press the button on th ...

Climate Control
...

Other information:

Kia Cee'd JD Owners Manual: Air bag non-inflation conditions
In certain low-speed collisions the air bags may not deploy. The air bags are designed not to deploy in such cases because they may not provide benefits beyond the protection of the seat belts in such collisions. Air bags are not designed to inflate in rear collisions, ...

Kia Cee'd JD Service Manual: Blind Spot Detection Unit" Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the rear bumper cover. (Refer to Body - "Rear Bumper Cover") 3. Remove the BSD unit (A) after loosening the mounting nu ...

© 2017-2021 www.kceed.com