Kia Cee'd: Interior Trim / Rear Transverse Trim Repair procedures

Kia Cee'd JD Service Manual / Body (Interior and Exterior) / Interior Trim / Rear Transverse Trim Repair procedures

Replacement

•	Put on gloves to protect your hands.

•	Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.

•	Take care not to bend or scratch the trim and panels.

1.	After loosening the mounting bolts and clips, then remove the rear transverse trim (A).

Install in the reverse order of removal.

•	Replace any damaged clips.

Rear Transverse Trim Components and components location

Component Location 1. Rear transverse trim ...

Luggage Side Trim Components and components location

Component Location [5Door] 1. Luggage side trim [3Door] 1. Luggage side trim ...

Other information:

Kia Cee'd JD Service Manual: Schematic diagrams
Schematic Diagrams MDPS Circuit Diagram Harness Connector Connector Pin no Pin name Battery 1 Battery + 2 Battery - Vehicle signal ...

Kia Cee'd JD Service Manual: Knock Sensor (KS) Description and operation
Description Knocking is a phenomenon characterized by undesirable vibration and noise and can cause engine damage. Knock Sensor (KS) is installed on the cylinder block and senses engine knocking. When knocking occurs, the vibration from the cylinder block is applied as pre ...