Ford Escape: MyKey™ / Programming a MyKey. Clearing All MyKeys. Checking MyKey System Status. Using MyKey With Remote Start Systems

Ford Escape 2020-2021 Owners Manual / MyKey™ / Programming a MyKey. Clearing All MyKeys. Checking MyKey System Status. Using MyKey With Remote Start Systems

Programming a MyKey

You can program any remote control to become a restricted MyKey, but you must leave one unmodified as an admin key.

  1. Switch the ignition on using an admin key.
  2. Press Settings on the touchscreen.
  3. Press Vehicle Settings.
  4. Press MyKey.
  5. Select a setting and press the OK button.
  6. Configure the setting

Clearing All MyKeys

restrictions and return all MyKeys to their original admin key status.

  1. Switch the ignition on using an admin key.
  2. Press Settings on the touchscreen.
  3. Press Vehicle Settings.
  4. Press MyKey.
  5. Press Clear All MyKeys.
  6. Press Yes.

Checking MyKey System Status

You can find information about the distance traveled using a MyKey, and the number of admin keys and MyKeys created for your vehicle.

  1. Switch the ignition on.
  2. Press Settings on the touchscreen.
  3. Press Vehicle Settings.
  4. Press MyKey.
  5. Press MyKey Information.

Using MyKey With Remote Start Systems

MyKey is not compatible with unapproved, aftermarket remote start systems. If you choose to install a remote start system, see an authorized dealer for an approved remote start system.

Creating a MyKey - Vehicles With: Push Button Start. Creating a MyKey - Vehicles With: Flip Key
Creating a MyKey - Vehicles With: Push Button Start Remove the mat covering the backup location. Remove the key blade from the transmitter. Place the passive key in the position shown, with ...

MyKey – Troubleshooting
MyKey – Information Messages - Vehicles With: Push Button Start MyKey – Information Messages - Vehicles With: Flip Key MyKey – Frequently Asked Questions - Vehicles With: Push Button Start Wha ...

Other information:

Kia Cee'd JD Service Manual: Radiator Repair procedures
Removal and Installation 1. Disconnect the battery negative terminal. 2. Remove the air cleaner assembly. (Refer to Intake and exhaust system - "Air Cleaner") 3. Remove the battery tray. ...

Kia Cee'd JD Service Manual: Intake Manifold Components and components location
Components   1. Intake manifold assembly 2. Intake manifold gasket 3. Electronic throttle body gasket 4. Electronic throttle body 5. Bracket ...

© 2017-2021 www.kceed.com