Kia Cee'd: Smart key function / Locking
1. Carry the smart key.
2. Close all doors.
3. Press the button of the outside door handle.
4. The hazard warning lights will blink once (the engine hood and tailgate must be closed). Also, the outside rearview mirror will automatically fold if the outside rearview mirror folding switch is in the AUTO position (if equipped).
5. Make sure that doors are locked by pulling the outside door handle.
✽ NOTICE
- The button will only operate when the smart key is within 0.7 m (28 in.) from the outside door handle.
- Even though you press the outside
door handle button, the doors will not
lock and the chime will sound for 3
seconds if any of following occur:
- The smart key is in the vehicle.
- The engine start/stop button is in ACC or ON position.
- Any door except the tailgate is opened.
Smart key function
1.Door lock
2.Door unlock
3.Tailgate unlock
With a smart key, you can lock or unlock
a door and tailgate and even start the
engine without inserting the key.
The functions of the buttons on ...
Unlocking
1. Carry the smart key.
2.Press the button of the front outside
door handle.
3.All doors will unlock and the hazard
warning lights will blink twice. Also, the
outside rearview mirror will auto ...
Other information:
Kia Cee'd JD Service Manual: Front Stabilizer Bar Repair procedures
Replacement
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the front wheel and tire (A) from front hub.
Tightening torque:
88.2 ~ ...
Kia Cee'd JD Owners Manual: Glow indicator
(Diesel engine)
The indicator light illuminates when the
ignition switch is placed at the ON position.
The engine can be started after the
preheat indicator light goes off. The illuminating
time varies with the water temperature,
air temperature and battery
condition.
✽ NOTICE
If the engine does n ...
