Kia Cee'd: Blower / Intake Actuator Description and operation

The intake actuator is located at the blower unit. It regulates the intake door by the signal from control unit. Pressing the intake selection switch will shift between recirculation and fresh air modes.

Climate Control Air Filter Repair procedures

Replacement 1. Open the glove box. 2. Disconnect the stopper (B) from the glove box (A). 3. Disco ...

Intake Actuator Repair procedures

Inspection 1. Turn the ignition switch OFF. 2. Disconnect the intake actuator connector. 3. Verify that t ...

Other information:

Kia Cee'd JD Service Manual: Shift Lever Repair procedures
Removal 1. Disconnect the battery negative (-) cable. 2. Remove the gear boots (A) and then remove the shift lever knob (B) by rotating counter-clockwise. 3. Remove the floor console assembly. ...

Kia Cee'd JD Service Manual: Engine Mounting Repair procedures
Removal and Installation [Rollroad mounting] 1. Rollroad bracket mounting bolts and rollroad bracket (A). Tightening torque Nut (B) : 107.9 ~ 127.5 N.m (11.0 ~ 13.0 kgf.m, 79.6 ~ 94.0 lb-ft) ...