Ford Escape: Pre-Collision Assist / How Does Pre-Collision Assist Work.

Ford Escape 2020-2021 Owners Manual / Pre-Collision Assist / How Does Pre-Collision Assist Work.

The system warns the driver of potential hazards by providing three levels of assistance.

If your vehicle is rapidly approaching potential hazards the system provides the following levels of functionality:

  1. Alert.
  2. Brake Support.
  3. Automatic Emergency Braking.

Ford Escape. How Does Pre-Collision Assist Work. Alert: When active, a flashing visual warning appears and an audible warning tone sounds.

Brake Support: The system is designed to help reduce the impact speed by preparing the brakes for rapid braking. The system does not automatically apply the brakes. If you press the brake pedal, the system could apply additional braking up to maximum braking force, even if you lightly press the brake pedal.

Automatic Emergency Braking: Automatic emergency braking may activate if the system determines that a collision is imminent.

Note: If you perceive pre-collision assist alerts as being too frequent or disturbing, then you can reduce the alert sensitivity, although the manufacturer recommends using the highest sensitivity setting where possible. Setting lower sensitivity would lead to fewer and later system warnings.

Each system has various levels of detection capabilities.

Pre-Collision Assist
What Is Pre-Collision Assist Pre-collision assist detects and warns of approaching hazards in the roadway. If your vehicle is rapidly approaching another stationary vehicle, a vehicle traveling in ...

Pre-Collision Assist Precautions. Pre-Collision Assist Limitations
Pre-Collision Assist Precautions WARNING: You are responsible for controlling your vehicle at all times. The system is designed to be an aid and does not relieve you of your responsibility to driv ...

Other information:

Ford Escape 2020-2021 Owners Manual: Switching All of the Interior Lamps On and Off. Switching the Front Interior Lamps On and Off. Switching the Rear Interior Lamps On and Off
Switching All of the Interior Lamps On and Off The lamps turn on under the following conditions: You open any door. You press a button on the remote control. You press the all lamps on button on the overhead console. Press to switch all interior lamps on or off. Switching the Front Inte ...

Kia Cee'd JD Service Manual: Canister Repair procedures
Removal 1. Turn the ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the fuel tank assembly. (Refer to Fuel System - "Fuel Tank") 3. Disconnect the vapor hos ...

© 2017-2021 www.kceed.com