Ford Escape: Blind Spot Information System / How Does Blind Spot Information System Work. Blind Spot Information System Precautions.  Blind Spot Information System Limitations

Ford Escape 2020-2021 Owners Manual / Blind Spot Information System / How Does Blind Spot Information System Work. Blind Spot Information System Precautions.  Blind Spot Information System Limitations

How Does Blind Spot Information System Work

Blind spot information system uses sensors on both sides of your vehicle, detecting rearward from the exterior mirrors to approximately 13 ft (4 m) beyond the rear bumper. The detection area extends to approximately 59 ft (18 m) beyond the rear bumper when the vehicle speed is greater than 30 mph (48 km/h) to alert you of faster approaching vehicles.

Ford Escape. How Does Blind Spot Information System Work. Blind Spot Information System Precautions.  Blind Spot Information System Limitations

Blind Spot Information System Precautions

WARNING: Do not use the blind spot information system as a replacement for using the interior and exterior mirrors or looking over your shoulder before changing lanes. The blind spot information system is not a replacement for careful driving.

WARNING: The system may not operate properly during severe weather conditions, for example snow, ice, heavy rain and spray. Always drive with due care and attention. Failure to take care may result in a crash.

Note: Blind spot information system does not prevent contact with other vehicles. It does not detect parked vehicles, pedestrians, animals or other infrastructure.

Blind Spot Information System Limitations

Blind spot information system does not operate in park (P) or reverse (R).

The system may not alert you if a vehicle quickly passes through the detection zone.

Blind Spot Information System
What Is Blind Spot Information System Blind spot information system detects vehicles that may have entered the blind spot zone. ...

Blind Spot Information System Requirements. Switching Blind Spot Information System On and Off
Blind Spot Information System Requirements Blind spot information system turns on when all the following occur: You start your vehicle. You shift into drive (D). The vehicle speed is greater than ...

Other information:

Kia Cee'd JD Service Manual: Radiator Repair procedures
Removal and Installation 1. Disconnect the battery negative terminal. 2. Remove the air cleaner assembly. (Refer to Intake and exhaust system - "Air Cleaner") 3. Remove the battery tray. ...

Ford Escape 2020-2021 Owners Manual: Using Lower Anchors and Tethers for Children
WARNING: Do not attach two child safety restraints to the same anchor. In a crash, one anchor may not be strong enough to hold two child safety restraint attachments and may break, causing serious injury or death. WARNING: Depending on where you secure a child restraint, and depending on the ...

© 2017-2021 www.kceed.com