Kia Cee'd: Body Electrical System / Horn

Repair procedures

Inspection Lighting Switch Inspection With the multifunction switch in each position, make sure that continuity exists between the terminals below. If continuity is not as speci ...

Components and components location

Component Location   1. Horn switch 2. Horn relay (Engine room compartment) 3. Clock spring 4. Horn (Low pitch) 5. Horn (High pitch) ...

Other information:

Kia Cee'd JD Service Manual: Oil Level Gauge & Pipe Repair procedures
Removal and Installation 1. Remove the oil lever gauge(A). Tightening torque: 9.8 ~ 11.8N.m (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft) 2. Install in the reverse order of removal. ...

Kia Cee'd JD Service Manual: Engine Control Module (ECM) Repair procedures
Removal    When replacing the ECM, the vehicle equipped with the immobilizer must be performed procedure as below. [In the case of installing used ECM] 1) Perform "ECM Neutral mode" ...