Ford Escape: Garage Door Opener / Garage Door Opener Limitations. Programming the Garage Door Opener to Your Hand-Held Transmitter

Ford Escape 2020-2021 Owners Manual / Garage Door Opener / Garage Door Opener Limitations. Programming the Garage Door Opener to Your Hand-Held Transmitter

Garage Door Opener Limitations

Canadian radio-frequency laws require transmitter signals to time-out (or quit) after several seconds – which may not be long enough for HomeLink to pick up the signal.

U.S. gate operators time-out in the same manner.

Note: If programming a garage door opener or gate operator, it is advised to unplug the device during the “cycling” process to prevent possible overheating.

Programming the Garage Door Opener to Your Hand-Held Transmitter

This process is to program your in-vehicle HomeLink function button with your hand-held transmitter.

Note: The programming steps below assume you will be programming HomeLink that was not previously programmed. If your HomeLink was previously programmed, you may need to erase your HomeLink buttons.

Ford Escape. Garage Door Opener Limitations. Programming the Garage Door Opener to Your Hand-Held Transmitter

  1. With your vehicle parked outside of the garage, switch your ignition to the on position, but do not start your vehicle.
  2. Press and release one of the three HomeLink function buttons that you would like to program.
  3. Hold your hand-held garage door transmitter 1–3 in (2–8 cm) away from the HomeLink button you want to program.
  4. Press and hold the hand-held transmitter button you want to program while watching the indicator light on HomeLink. Continue to hold the hand-held button until the HomeLink indicator light flashes rapidly or is continuously on.

    Note: You may need to use a different method if you live in Canada or have difficulties programming your gate operator or garage door opener.

  5. Press and hold the HomeLink button you programmed for two seconds, then release. You may need to do this twice to activate the door.

    Note: If the indicator light stays on, the programming is complete.

    Note: If the HomeLink indicator flashes rapidly, repeat step 5.

    Note: If your device still does not operate, you must program your garage door.

  6. To program additional buttons, repeat Steps 1 – 4.
What Is the Garage Door Opener. How Does the Garage Door Opener Work. Garage Door Opener Precautions
What Is the Garage Door Opener HomeLink Wireless Control System The universal garage door opener replaces the common hand-held garage door opener with a three-button transmitter integrated into t ...

Programming the Garage Door Opener to Your Garage Door Opener Motor
Press the learn button on the garage door opener motor, you have 30 seconds to complete the next two steps. Return to your vehicle. Press and hold one of the three HomeLink function buttons ...

Other information:

Kia Cee'd JD Service Manual: Camshaft Position Sensor (CMPS) Description and operation
Description Camshaft Position Sensor (CMPS) is a hall sensor and detects the camshaft position by using a hall element. It is related with Crankshaft Position Sensor (CKPS) and detects the piston position of each cylinder which the CKPS can't detect. The CMPS is i ...

Kia Cee'd JD Owners Manual: Driver’s Attention
The driver must be cautious in the below situations, because the system may not detect other vehicles or objects in certain circumstances. The vehicle drives on a curved road or through a tollgate. The vehicle is turning left or right at a crossroad. The sensor is polluted with r ...

© 2017-2021 www.kceed.com