Kia Cee'd: Front Seat / Front Seat Shield Inner Cover Repair procedures

Kia Cee'd JD Service Manual / Body (Interior and Exterior) / Front Seat / Front Seat Shield Inner Cover Repair procedures

Replacement
  
Put on gloves to protect your hands.
  
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
1.
Remove the front seat assembly.
(Refer to Front Seat - "Front Seat Assembly")
2.
After loosening the mounting screw, then remove the front seat shield inner cover (A).

3.
Install in the reverse order of removal.
  
Replace any damaged clips.
Front Seat Shield Inner Cover Components and components location
Component Location   1. Front seat shield inner cover ...

Front Seat Back Cover Components and components location
Component Location   1. Front seat back cover ...

Other information:

: Tire Replacement Requirements
Your vehicle is equipped with tires designed to provide a safe ride and handling capability. WARNING: Only use replacement tires and wheels that are the same size, load index, speed rating and type (such as P-metric versus LT-metric or all-season versus all-terrain) as those originally prov ...

Kia Cee'd JD Service Manual: Rain Sensor Repair procedures
Inspection Rain Sensing Wiper 1. In IGN2 ON state, if auto switch input (LIN communication) is ON then both wiper low relay and wiper high relay outputs are controlled by the rain sensor input signal. 2. If the wiper switc ...

© 2017-2026 www.kceed.com