Kia Cee'd: Steering wheel / Flex Steering Repair procedures

Kia Cee'd JD Service Manual / Steering System / Steering wheel / Flex Steering Repair procedures

Inspection
1.
Check the audio remote control switch (A) for resistance between terminals in each switch position.

 
Switch
Connector terminal
Resistance (±5%)
Cancel
2-7
180 Ω
Set
2-7
330 Ω
Resume
2-7
550 Ω
Cruise
2-7
880 Ω
S/Limit
2-7
1.44 kΩ
Flex steer
4-7
180 Ω

Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the driver airbag module.
3.
Remove the steering wheel.
(Refer to Electric Power Steering - "Steering Column and Shaft")
4.
Disengage the steering wheel remote control switch assembly.
5.
Remove the steering wheel remote control switch (A).

6.
Install in the reverse order of removal.
Flex Steering Schematic diagrams
Circuit Diagram ...

Electric Power Steering
...

Other information:

Kia Cee'd JD Service Manual: Manifold Absolute Pressure Sensor (MAPS) Description and operation
Description Manifold Absolute Pressure Sensor (MAPS) is a speed-density type sensor and is installed on the surge tank. It senses absolute pressure of the surge tank and transfers the analog signal proportional to the pressure to the ECM. By using this signal, the ECM calcul ...

Kia Cee'd JD Owners Manual: Auto Start
To restart the engine from idle stop mode Press the clutch pedal when the shift lever is in the N (Neutral) position. A message "Press Clutch Pedal for Auto Start" will appear on the LCD display. The engine will start and the green AUTO STOP () indicator on the instrument clu ...

© 2017-2020 www.kceed.com