Kia Cee'd: Seat Belt Pretensioner (BPT) / Description and operation
| Description |
The Seat Belt Pretensioners (BPT) are installed inside Center Pillar (LH & RH).
When a vehicle crashes with a certain degree of frontal impact, the pretensioner
seat belt helps to reduce the severity of injury to the front seat occupants
by retracting the seat belt webbing. This prevents the front occupants from
thrusting forward and hitting the steering wheel or the instrument panel when
the vehicle crashes.
Never attempt to measure the circuit resistance of the Seat Belt Pretensioner
(BPT) even if you are using the specified tester. If the circuit resistance
is measured with a tester, the pretensioner will be ignited accidentally.
This will result in serious personal injury.
|
Components and components location
Components
...
Other information:
Kia Cee'd Service Manual: Muffler Repair procedures
Removal and Installation
[Front muffler]
1.
Disconnect the rear oxygen sensor connector (A).
2.
Remove the front muffler (A).
Tightening torque:
39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ...
Kia Cee'd Service Manual: Blower Resistor (Manual) Repair procedures
Inspection
1.
Measure the resistance between the terminals.
2.
If the measured resistance is not within specification, the blower resistor
must be replaced. (After removing the resistor.)
Replacement
...
© 2017-2019 www.kceed.com