Kia Cee'd: Cylinder Head Assembly / Cylinder Head Cover Components and components location
| Components |
| 1. Cylinder head cover 2. Cylinder head cover gasket |
3. Cam position sensor |
Valve clearance adjustment
Valve Clearance Inspection
And Adjustment
Inspect and adjust the valve clearance when the engine is cold (En ...
Cylinder Head Cover Repair procedures
Removal
1.
Remove the engine cover.
2.
Disconnect the battery negative terminal.
3.
Disconnect the intake ...
Other information:
Kia Cee'd JD Owners Manual: Multi fuse
If the multi fuse is blown, it must be
removed as follows:
1. Turn off the engine.
2. Disconnect the negative battery cable.
3. Remove the fuse panel on the right
side in the engine compartment.
4. Remove the nuts shown in the picture
above.
5. Replace the fuse with a new one of the
s ...
Ford Escape 2020-2026 Owners Manual: Locating the Safety Compliance Certification Labels. What Is the Gross Axle Weight Rating. What Is the Gross Vehicle Weight Rating. What Is the Gross Combined Weight Rating
Locating the Safety Compliance Certification Labels
Safety Compliance Certification Label
Example:
The Safety Compliance Certification label
is located on the door hinge pillar,
door-latch post, or the door edge that
meets the door-latch post, next to the
driver seating position.
What Is the G ...
