| Description |
Never attempt to measure the circuit resistance of the airbag module
even if you are using the specified tester. If the circuit resistance
is measured with a tester, accidental airbag deployment will result
in serious personal injury.
|
Side Airbag (SAB) Module Repair proceduresKia Cee'd JD Service Manual: Assist Handle Repair procedures
Replacement
•
Put on gloves to protect your hands.
•
Use ...
Kia Cee'd JD Service Manual: Blind Spot Detection Unit" Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the rear bumper cover.
(Refer to Body - "Rear Bumper Cover")
3.
Remove the BSD unit (A) after loosening the mounting nu ...