1. Open the cover (if equipped) for the holder position (1) or (2) you want to install.
2. Compress the one side net upper shaft to length direction before insert the net upper shaft into the large hole (3) and then secure by sliding into the small hole (4).
3. Hang the net strap hooks in the corresponding hook holders on the floor behind the front seat or rear seat.
This symbol indicates the position of the hook holders on the floor behind the rear seat.
4. Fasten the straps, by using the adjuster (1).
WARNING
WARNING
Kia Cee'd JD Service Manual: Heated Oxygen Sensor (HO2S) Description and operation
Description
Heated Oxygen Sensor (HO2S) consists of zirconium and alumina and is installed
both upstream and downstream of the Manifold Catalytic Converter. The sensor
output voltage varies in accordance with the air/fuel ratio.
The sensor must be hot in order to operate n ...
Kia Cee'd JD Service Manual: ISG (Idle Stop & Go) Components and components location
Components Location
1 . Battery sensor
2 . Brake Booster Vacuum Pressure Sensor (BBVPS)
3 . AGM battery
4 . DC DC converter
5 . ISG OFF switch
6. Alternator
7 . Starter
8. Neutral switch
9. Clutch switch
10. Door switch
11 ...