Removal |
1. |
Turn the crankshaft pulley clockwise, and align its groove with the
timing mark of the timing chain cover.
|
2. |
Remove the timing chain cover.
(Refer to Timing System - "Timing Chain Cover")
|
3. |
Align the timing marks of the CVVT sprockets with the upper surface
of the cylinder head to make No.1 cylinder be positioned at TDC.
|
4. |
Remove the timing chain (A).
|
5. |
Remove the timing chain tensioner arm (A) and guide (B).
|
6. |
Remove the timing chain (A).
|
Inspection |
1. |
Check the CVVT sprocket, crankshaft sprocket teeth for abnormal wear,
cracks or damage. Replace if necessary.
|
2. |
Check a contact surface of the chain tensioner arm and guide for abnormal
wear, cracks or damage.
Replace if necessary.
|
3. |
Check the hydraulic tensioner for its piston stroke and ratchet operation.
Replace if necessary.
|
4. |
Check the timing chain for its elongation, abnormal wear or damage.
Replace if necessary.
|
Installation |
1. |
Dowel pin of crankshaft should be positioned at 3° in relation to vertical
center line.
|
2. |
Align the TDC marks (A) of the CVVT sprockets with the upper surface
of the cylinder head to make No.1 cylinder be positioned at TDC.
|
3. |
Install the new O-rings (A).
|
4. |
Install the timing chain guide (A) and the timing chain (B).
|
5. |
Install the chain tensioner arm (A).
|
6. |
Install the hydraulic tensioner (A) and remove the pin (B).
|
7. |
Install the timing chain cover.
|
Kia Cee'd JD Service Manual: Side Airbag (SAB) Module Description and operation
Description
The Side Airbags (SAB) are installed inside the front seat and protects the
driver and passenger from danger when side crash occurs. The SRSCM determines
deployment of side airbag by using Side Impact Sensor (SIS) signal.
...
Kia Cee'd JD Service Manual: Engine Control Module (ECM) Schematic diagrams
ECM (Engine Control Module)
ECM Harness Connector
ECM Terminal Function
Connector [C200-A]
Pin No.
Description
Connected to
1
Injector (Cylinder #3) [High] control output
...