Kia Cee'd: Manual Transaxle System / Neutral Switch Repair procedures

Inspection
1.
Remove the air cleaner assembly.
(Refer to Engine Mechanical System - "Air Cleaner)
2.
Disconnect the neutral switch connector (A).

3.
Check the continuity between power terminal and signal terminal.

Removal
1.
Remove the air cleaner assembly.
(Refer to Engine Mechanical System - "Air Cleaner)
2.
Disconnect the neutral switch connector (A).

3.
Remove the neutral switch.
Tightening torque :
39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft)
Installation
1.
Install in the reverse order of removal
  
The neutral switch must be replaced with new one.
Neutral Switch Description and operation
Description • Signal of neutral switch is transmitted to the ECM in the neutral state. • This signal is blocked when gear changed ...

Manual Transaxle Control System
...

Other information:

Kia Cee'd JD Service Manual: Oil Pump Components and components location
Components   1.  Timing chain cover 2.  Inner rotor 3.  Outer rotor 4.  Pump cover ...

Kia Cee'd JD Service Manual: Components and components location
Components   1. Power door mirror 2. Power door mirror switch 3. Power folding mirror switch ...

© 2017-2024 www.kceed.com