Kia Cee'd: Fuel Delivery System / Filler-Neck Assembly Repair procedures

Kia Cee'd JD Service Manual / Fuel System / Fuel Delivery System / Filler-Neck Assembly Repair procedures

Removal

1.	Lift the vehicle.

2.	Disconnect the fuel filler hose (A), leveling hose (B) and the ventilation hose (C).

3.	Open the fuel filler door and then remove the filler-neck installation screw (A).

4.	Remove the rear-LH wheel, tire, and the inner wheel house (A).

5.	Remove the filler-neck assembly from the vehicle after removing the bracket installation bolt (A).

Installation

Installation is reverse of removal.

Filler-neck assembly bracket installation bolt :

3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)

Filler-neck assembly installation screw :

7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)

Fuel Line Repair procedures

Removal 1. Turn the ignition switch OFF, and then remove battery (-) cable. 2. Release the residual pressure in fuel line. ( ...

Accelerator Pedal Repair procedures

Removal 1. Turn the ignition switch OFF and disconnect the negative (-) battery cable. 2. Disconnect the accelerator position sens ...

Other information:

Kia Cee'd JD Owners Manual: Tire rotation
To equalize tread wear, it is recommended that the tires be rotated every 12,000 km (7,500 miles) or sooner if irregular wear develops. During rotation, check the tires for correct balance. When rotating tires, check for uneven wear and damage. Abnormal wear is usually caused by incorr ...

Kia Cee'd JD Service Manual: A/C Pressure Transducer Repair procedures
Inspection 1. Measure the pressure of high pressure line by measuring voltage output between terminal “1” and “2”. 2. Inspect the voltage value whether it is sufficient to be regular value or not. ...