Kia Cee'd: Crash Pad / Crash Pad Lower Panel Repair procedures
| • |
When prying with a flat-tip screwdriver, wrap it with protective
tape, and apply protective tape around the related parts, to
prevent damage.
|
| • |
Put on gloves to protect your hands.
|
|
| • |
Take care not to scratch the body surface.
|
|
| 1. |
Using a screwdriver or remover, remove the crash pad side cover [LH]
(A).
|
| 2. |
After loosening the mounting screws, then remove the crash pad lower
panel (A).
|
| 3. |
Disconnect the diagnosis connector (A) and crash pad lower switch connector
(B).
|
| 4. |
Install in the reverse order of removal.
| •
|
Make sure the connector are connected in properly.
|
| •
|
Replace any damaged clips.
|
|
|
Replacement
•
When prying with a flat-tip screwdriver, wrap it with protective
...
Component Location
1. Glove box housing
...
Other information:
Kia Cee'd JD Service Manual: Fuel Line Repair procedures
Removal
1.
Turn the ignition switch OFF, and then remove battery (-) cable.
2.
Release the residual pressure in fuel line.
(Reter to Fuel Delivery System - "Release Residual Pressure in Fuel
Line")
...
Kia Cee'd JD Owners Manual: Tire chains
Since the sidewalls of radial tires are
thinner, they can be damaged by mounting
some types of snow chains on them.
Therefore, the use of snow tires is recommended
instead of snow chains. Do
not mount tire chains on vehicles
equipped with aluminum wheels; snow
chains may cause damage ...
Crash Pad Lower Panel Repair procedures
Glove Box Housing Components and components location