Ford Escape: Charging Your Vehicle - Plug- In Hybrid Electric Vehicle (PHEV) / Charging Equipment

Note: Ground this product. If it malfunctions or breaks down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This product comes with a cord having an equipment grounding conductor and a grounding plug. Make sure you plug it into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

Note: You need to plug the convenience cord into a dedicated outlet.

Note: Firmly fit the AC wall plug into the AC outlet. If the connection feels loose, worn or the AC outlet is damaged, please have a qualified electrician replace the AC outlet. Using a convenience cord with a worn outlet could cause burns, property damage and increase the risk of electric shock.

Note: Do not use the 120 volt convenience cord with an extension cord, two-prong adapter, surge protector, timer or other adapter.

Convenience Cord

Ford Escape. Charging Equipment

  1. Power.
  2. Fault.
  3. Check Outlet.

CAUTION: TO REDUCE THE RISK OF FIRE- Use a three-prong AC outlet that is properly grounded, 15-20 amps or greater, and in good condition. Use a dedicated line. You cannot have other appliances connected to the same circuit. If you do not use a dedicated circuit, the circuit breaker could trip or open. If you do not have a dedicated circuit, contact a licensed professional electrician for proper installation.

Note:Make sure the electrical source meets the requirements for the high-voltage batteries to charge.

Make sure that the convenience cord is completely unwrapped before charging. Always plug the cord into the AC outlet before connecting the charged coupler into the charge port on your vehicle.

Note:When you plug the convenience cord into an outlet, use the following table to determine your vehicle charge status. If the power indicator light is off after plugging in the convenience cord, use a different outlet.

Ford Escape. Charging Equipment

Ford Escape. Charging Equipment

Note: If charging for your plug-in vehicle fails, please call the Customer Relationship Center, or click on Call for support or Live chat at our website.

Moving and Storage Instructions

Note: Do not hold the convenience cord by the flexible power cable.

Make sure that you completely wrap the convenience cord after charging.

When complete, replace the convenience cord in the luggage compartment.

Note:Store the convenience cord in a clean, dry place between the temperature of -39.9–193.9°F (-40–90°C).

Charging Your Vehicle Precautions
WARNING: In Canada, do not use the 120 volt convenience cord in commercial garages. WARNING: This equipment has arcing or sparking parts. Do not expose to flammable vapors. Position this equipmen ...

Locating the Charge Port. Charge Port Indicators
Locating the Charge Port The charge port is between the front left-hand side door and the front left-hand wheel well. To open, press the center right edge of the charge port door, and then release ...

Other information:

Kia Cee'd JD Service Manual: Crash Pad Lower Panel Repair procedures
Replacement    • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. ...

Kia Cee'd JD Service Manual: Heater Unit Components and components location
Component Location Components   1. Heat Case (Left) 2. Heat Case (Right) 3. Separator 4. Defog Door 5. Vent Door 6. Vent Guide 7. Temp Door 8. Mode Control Actuator 9. Temperature Control Actuator (Left) 10. Temper ...

© 2017-2021 www.kceed.com