Ford Escape: Capacities and Specifications / Brake Fluid Specification

Use fluid that meets the defined specification and viscosity grade.

If you do not use fluid that meets the defined specification and viscosity grade, it could result in:

Note: We recommend you use DOT 4 Low Viscosity (LV) High Performance Brake Fluid or equivalent meeting WSS-M6C65-A2. If you use any fluid other than the recommended fluid, it could cause reduced brake performance and not meet our performance standards. Keep brake fluid clean and dry. Contamination with dirt, water, petroleum products or other materials could result in brake system damage and possible failure.

Capacities

Ford Escape. Brake Fluid Specification

Materials

Ford Escape. Brake Fluid Specification

Washer Fluid Specification
Capacities Materials ...

Vehicle Identification
Locating the Vehicle Identification Number The vehicle identification number is on the left-hand side of the instrument panel. Note: In the illustration, XXXX is representative of your vehicle iden ...

Other information:

Kia Cee'd JD Service Manual: Back-up Lamp Switch Description and operation
Description • Detects the shift operation to the reverse gear. • When the transaxle is in the reverse condition, the reverse shift rug turns the back-up lamp switch onby pressing a shaft part of the switch. ...

Kia Cee'd JD Service Manual: Components and components location
Component Location   1. Panoramaroof 2. Panoramaroof switch 3. Panoramaroof motor & controller 4. Roller blind motor & slave controller ...

© 2017-2021 www.kceed.com