Kia Cee'd: Rear Seat / Rear Seat Assembly Repair procedures

Kia Cee'd JD Service Manual / Body (Interior and Exterior) / Rear Seat / Rear Seat Assembly Repair procedures

Replacement

After loosening the mounting bolts and then push it up and remove the rear seat cushion assembly (A).

Tightening torque :

16.7 ~ 25.5 N.m (1.7 ~ 2.6 kgf.m, 12.3 ~ 18.8 lb-ft)

[5Door, Waggon]

[3Door]

Loosen the rear center seat belt buckle (A) mounting bolt.

Tightening torque :

39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)

3.	Remove the rear seat back center hinge bracket cover (A).

Loosen the rear seat back mounting bolt (A).

Tightening torque :

16.7 ~ 25.5 N.m (1.7 ~ 2.6 kgf.m, 12.3 ~ 18.8 lb-ft)

5.	Pull out the rear seat center mounting bracket (A).

6.	Remove the rear seat back assembly (B).

7.	Install in the reverse order of removal.

Rear Seat Assembly Components and components location

Component Location 1. Rear seat cushion assembly 2. Rear seat back assembly ...

Rear Seat Back Cover Components and components location

Component Location 1. Rear seat back cover [LH] 2. Rear seat back cover [RH] ...

Other information:

Kia Cee'd JD Service Manual: Audio Unit Repair procedures
Removal • Take care not to scratch the center fascia panel and related parts. • Eject all the disc before removing the audio un ...

Kia Cee'd JD Owners Manual: Resetting the sunroof
Whenever the vehicle battery is disconnected or discharged, or related fuse is blown, you must reset your sunroof system as follows: 1.Turn the engine on and close the sunroof glass and sunshade completely. 2.Release the control lever. 3. Push the sunroof control lever forward in the di ...