Inspection |
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the front door trim.
(Refer to Body - "Front Door Trim")
|
3. |
Disconnect the connector from the switch.
|
4. |
Check for continuity between the terminals in each switch position according
to the table. If the continuity condition is not normal, replace the
switch.
[4Door All Safety(LHD)]
[4Door All Safety(RHD)]
[2Door All Safety(LHD)]
[2Door All Safety(RHD)]
[2Door Auto Down(LHD)]
[2Door Auto Down(RHD)]
|
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the front door trim.
(Refer to Body - "Front Door Trim")
Remove the rear door trim.
(Refer to Body - "Rear Door Trim")
|
3. |
Disconnect the connector from the switch.
|
4. |
Check for continuity between the terminals in each switch position according
to the table. If the continuity condition is not normal, replace the
switch.
[Safety Up/Down]
[Manual Down]
|
Kia Cee'd JD Service Manual: Front Wheel Speed Sensor Components and components location
Components
1. Front wheel speed sensor
2. Front wheel speed sensor connector
...
Kia Cee'd JD Service Manual: Troubleshooting
Troubleshooting
1.
The lamp switch inputs can be checked using the GDS.
2.
To check the input value of lamp switch, select option "Body Control
Module".
3.
To consult the present input/outpu ...