Kia Cee'd: Airbag Module / Passenger Airbag (PAB) Module Description and operation

Kia Cee'd JD Service Manual / Restraint / Airbag Module / Passenger Airbag (PAB) Module Description and operation

Description

The passenger airbag (PAB) is installed inside the crash pad and protects the front passenger in the event of a frontal crash. The SRSCM determines if and when to deploy the PAB.

Never attempt to measure the circuit resistance of the airbag module (squib) even if you are using the specified tester. If the circuit resistance is measured with a tester, accidental airbag deployment will result in serious personal injury.

Driver Airbag (DAB) Module and Clock Spring Repair procedures

Removal 1. Set the front tires straight-ahead before removing the steering wheel. ...

Passenger Airbag (PAB) Module Components and components location

Components ...

Other information:

Kia Cee'd JD Service Manual: Drive Belt Repair procedures
Removal 1. Disconnect the battery negative terminal. 2. Loosen the alternator tension adjusting bolt (A) to loosen tension. 3. Remove the drive belt (A). Inspection ...

Kia Cee'd JD Service Manual: Crankshaft Position Sensor (CKPS) Description and operation
Description Crankshaft Position Sensor (CKPS) detects the crankshaft position and is one of the most important sensors of the engine control system. If there is no CKPS signal input, the engine may stop because of CKPS signal missing. This sensor is installed in ladder fra ...