Kia Cee'd: Charging System / Battery Sensor Description and operation

Vehicles have many control units that use more electricity. These units control their own system based on information from diverse sensors. It is important to have a stable power supply as there diverse sensors giving a variety of information. Battery sensor (A) is mounted on battery (-) terminal. It transmits battery voltage, current, temperature information to ECM. ECM controls generating voltage by duty cycle based on these signals.

Battery Troubleshooting

Troubleshooting ...

Battery Sensor Repair procedures

Removal 1. Disconnect the battery negative (-) cable. 2. Disconnect the battery sensor connector (A). 3. ...

Other information:

Kia Cee'd JD Owners Manual: Jack label
■ Type A ■ Type B ■ Type C 1. Model Name 2. Maximum allowable load 3. When using the jack, set your parking brake. 4. When using the jack, stop the engine. 5. Do not get under a vehicle that is supported by a jack. 6. The designated locations under the frame 7. When supp ...

Kia Cee'd JD Service Manual: Auto Light Sensor Repair procedures
Inspection In the state of IGN1 ON, when multifunction switch module detects auto light switch on, tail lamp relay output and head lamp low relay output are controlled according to auto light sensor's input. The auto light control doesn't work if the pin sunlight s ...