Kia Cee'd: Rear Seat Belt / Rear Seat Belt Retractor Repair procedures

Kia Cee'd JD Service Manual / Body (Interior and Exterior) / Rear Seat Belt / Rear Seat Belt Retractor Repair procedures

Replacement

•	When installing the belt, make sure not to damage the retractor.

1.	Remove the rear pillar trim. (Refer to Interior Trim - "Rear Pillar Trim")

After loosening the mounting bolt, then remove the rear seat belt lower anchor (A).

Tightening torque :

39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)

After loosening the mounting bolt, then remove the rear seat belt retractor (A).

Tightening torque :

39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)

Install in the reverse order of removal.

•	Replace any damaged clips.

•	Make sure the connector is plugged in properly.

Rear Seat Belt Retractor Components and components location

Component Location 1. Rear seat belt retractor ...

Rear Center Seat Belt Retractor Components and components location

Component Location 1. Rear center seat belt retractor ...

Other information:

Kia Cee'd JD Owners Manual: Caring for Disc
If the temperature inside the car is too high, open the car windows to ventilate before using the system. It is illegal to copy and use MP3/WMA files without permission. Use CDs that are created only by lawful means. Do not apply volatile agents, such as benzene and thinner, ...

Kia Cee'd JD Service Manual: Main Crash Pad Assembly Repair procedures
Replacement • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. ...