Removal and Installation |
1. |
Disconnect the rear oxygen sensor connector (A).
|
2. |
Remove the front muffler (A).
|
3. |
Install in the reverse order of removal.
|
1. |
Remove the center muffler & main muffler assembly(A).
|
2. |
Install in the reverse order of removal.
|
1. |
Check that the clamping part of the center muffler assembly is damaged
or deformed.
If the muffler is too corroded to clamp, replace the center muffler
assembly.
|
2. |
Record the gap (A, B, C, D, E, F) between the tail pipe (or tail trim)
and the rear bumper.
[Pipe type]
[Trim type]
[Bumper-integrated trim type]
|
3. |
Remove the catalytic converter & center muffler (A).
|
4. |
Cut the center muffler as the instruction below.
[With groove]
[Without groove]
[Replacement muffler]
|
5. |
Install the center muffler.
|
Kia Cee'd JD Owners Manual: Securing a child restraint system
with “ISOFIX” system and “Tether
Anchorage” system
ISOFIX is a standardised method of fitting
child seats that eliminates the need
to use the standard adult seat belt to
secure the seat in the vehicle. This
enables a much more secure and positive
location with the added benefit of
easier and quicker installation.
An ISOFIX-seat may on ...
Kia Cee'd JD Service Manual: Components and components location
Components
1. ABS Control Module(HECU)
2. Front Wheel Speed Sensor
3. Rear Wheel Speed Sensor
4. ABS Warning lamp
5. EBD / Parking brake warning lamp
...