Kia Cee'd: Dual Clutch Transmission Control System / Input Speed Sensor 2 Repair procedures

Kia Cee'd JD Service Manual / Dual Clutch Transmission(DCT) System / Dual Clutch Transmission Control System / Input Speed Sensor 2 Repair procedures

Inspection

Refer to DTC code "P2765, P2766" Input Shaft Speed Sensor.

Removal

1.	Turn off the ignition switch and then disconnect the battery (-) cable.

2.	Remove the under cover.

3.	Disconnect the input shaft speed sensor connector (A).

4.	Loosen the mounting bolt and then remove the input shaft speed sensor (B).

Installation

Install in the reverse order of removal.

Tightening torque :

7.8 ~ 9.8 N.m (0.8 ~ 1.0 kgf.m, 5.8 ~ 7.2 lb-ft)

Input Speed Sensor 2 Schematic diagrams

Schematic Diagrams ...

Inhibitor Switch Description and operation

Description The inhibitor switch is mounted on the transmission case. It includes the electric switch plate circuit and is directly connected with the transmission lever via tran ...

Other information:

Kia Cee'd JD Owners Manual: Heating
1. Set the mode to the position. 2. Set the air intake control to the outside (fresh) air position. 3. Set the temperature control to the desired position. 4. Set the fan speed control to the desired speed. 5. If dehumidified heating is desired, turn the air conditioning system on. • ...

Kia Cee'd JD Service Manual: Specifications
Specifications Fuel Delivery System Items Specification Fuel Tank Capacity 53 lit. (14.0 U.S.gal., 56.0 U.S.qt., 46.6 Imp.qt.) Fuel Filter Type Paper type ...