Kia Cee'd: Manual Transaxle Control System / Control Shaft Complete Repair procedures

Kia Cee'd JD Service Manual / Manual Transaxle System / Manual Transaxle Control System / Control Shaft Complete Repair procedures

Removal

1.	Move the shift lever to neutral gear position.

2.	Remove the air cleaner assembly. (Refer to Engine Mechanical System - "Air Cleaner")

3.	Remove the battery and battery tray. (Refer to Engine Electrical System - "Battery")

4.	Remove the control cable (B) from the control shaft after removing the pins (A).

Remove the control shaft complete (A).

Tightening torque :

19.6 ~ 26.5 N.m (2.0 ~ 2.7 kgf.m,14.5 ~ 19.5 lb-ft)

Installation

1.	Install in the reverse order of removal.

•	Install the control shaft complete after setting the neutral state.

•

Apply the sealant to the contact surface of transaxle and control shaft.

Specified sealant : Anaerobic adhesive for flange

Control Shaft Complete Components and components location

Components Location 1. Control Shaft Complete ...

Dual Clutch Transmission(DCT) System

...

Other information:

Kia Cee'd JD Service Manual: Side Impact Sensor (SIS) Description and operation
Description The Side Impact Sensor (SIS) system consists of two front SIS which are installed inside the Center Pillar (LH and RH). They are remote sensors that detect acceleration due to collision at their mounting locations. The primary purpose of the Side Impact Sensor (S ...

Kia Cee'd JD Service Manual: Components and components location
Components [LHD] 1. Driver Airbag (DAB) 2. Steering Wheel 3. Clock Spring 4. Seat Belt Pretensioner (BPT) 5. Side Impact Sensor (SIS) 6. Side Airbag (SAB) 7. Passenger Airbag (PAB) 8. Front Impact Sensor (FIS) 9. Curtain Ai ...