Ford Escape: Wipers and Washers / Autowipers

What Are Autowipers

Autowipers turns on and controls the speed and frequency of the windshield wipers.

Autowipers Settings

  1. Press Settings on the touchscreen.
  2. Press Vehicle Settings.
  3. Press Wipers.
  4. Switch Rain Sensing on or off.

Note: When you switch the feature off, the wipers do not operate based on the rain sensor. When you switch on the windshield wipers to the intermittent wipe position with the feature off, the wipers use the wipe speed set by the rotary control.

Adjusting the Sensitivity of the Rain Sensor

Ford Escape. Autowipers

  1. High sensitivity.
  2. Low sensitivity.

Use the rotary control to set the sensitivity of the rain sensor.

When you select high sensitivity, the wipers operate when the sensor detects a small amount of water on the windshield.

When you select low sensitivity, the wipers operate when the sensor detects a large amount of water on the windshield.

Wipers
Wiper Precautions Do not operate the wipers on a dry windshield. This could scratch the glass or damage the wiper blades. Use the windshield washers before wiping a dry windshield. Fully defrost t ...

Switching the Rear Window Wiper On and Off. Reverse Wipe
Switching the Rear Window Wiper On and Off Intermittent wipe. Continuous wipe. Rear window wiper off. Reverse Wipe What Is Reverse Wipe Reverse wipe turns on the rear window wiper when you shif ...

Other information:

Kia Cee'd JD Owners Manual: Applying the shackle on the guide rail
Put the shackle (A) in the position where the shackle is put in the rail. To move the shackle, press the button (1) and move the shackle along the rail. Make sure the shackle is clicked into place. To fix the luggage, pull up the hook (2) in the middle cargo bay. Now you can ...

Kia Cee'd JD Service Manual: Front Pillar Trim Repair procedures
Replacement    • Put on gloves to protect your hands.    • Use ...

© 2017-2021 www.kceed.com