Kia Cee'd: Parking brake - Hand type / Applying the parking brake
To engage the parking brake, first apply the foot brake and then without pressing the release button in, pull the parking brake lever up as far as possible. In addition it is recommended that when parking the vehicle on a gradient, the shift lever should be positioned in the appropriate low gear for manual transaxle vehicles or in the P (Park) position for automatic transaxle vehicles.
CAUTION
- Driving with the parking brake applied will cause excessive brake pad (or lining) and brake rotor wear.
- Do not operate the parking brake while the vehicle is moving except in an emergency situation. It could damage the vehicle system and make endanger driving safety.
Releasing the parking brake
To release the parking brake, first apply
the foot brake and pull up the parking
brake lever slightly. Secondly press the
release button (1) and lower the parking
brake lever (2) while press ...
Other information:
Kia Cee'd JD Service Manual: Gear Actuator Repair procedures
Removal
1.
Turn off the ignition switch and then disconnect the battery (-) cable.
2.
Remove the air cleaner assembly and air duct.
(Refer to Engine Mechanical System - "Air cleaner")
3.
...
: Vehicle Identification
Locating the Vehicle Identification Number
The vehicle identification number is on the
left-hand side of the instrument panel.
Note: In the illustration, XXXX is
representative of your vehicle identification
number.
Vehicle Identification Number Overview
The vehicle identification number contain ...
